Cummins NTAA855-G7 343kW

Cummins NTAA855-G7 343KW – Original from Chongqing Cummins Engine Plant (CCEC), Cummins Joint Venture Plant, 50% shareholding by Cummins USA, original genuine Cummins generator engine.

Our large wholesale of CCEC Cummins generator engine brings competitive agent price for Cummins NTAA855-G7 343KW. Our diesel generator factory manufacture Cummins generator set with high quality & fast delivery.

Cummins NTAA855-G7 Agent Wholesale Price & Cummins parts wholesaler

worldwide

Worldwide Shipping

security

Verified Certificates

queue

15 Working Days

Cummins NTAA855-G7 343kW

car-engine

PRIME POWER : 343 kW/460 HP @1500rpm

STANDBY POWER : 377 kW/505 HP @1500rpm

package

PACKING DETAILS

Dimension : 2200 * 1100 * 1700 mm,

G.W : 1400 KG

express-delivery

LEAD TIME : Around 15-30 Business Days

Rugged 4-cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.

Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.

Offers enhanced motor starting and fault clearing short-circuit capability.

The PowerCommand® electronic control is standard equipment and provides total genset system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentryTM protection, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

Standard cooling package provides reliable running at the rated power level, at up to 50 °C (122 °F) ambient temperature.

 

Optional weather protective and sound attenuated enclosures are available.

Dual wall sub-base fuel tanks are also offered.

The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems.

Further Information - Cummins NTAA855-G7 343kW

–Engine Operating with fuel system, water pump, lubricating oil pump, air cleaner and exhaust silencer, fan, and optional driven components. –Engine operating with fuel corresponding to grade No.2-D per ASTM D975. –ISO 3046, Part1, Standard Reference Conditions of : Barometric Pressure:100kPa(29.5in.Hg); Altitude: 110m (361ft.); Air Temperature: 25°C (77°F) ; Relative Humidity: 30% .

ENGINE MOUNTING Maximum Allowable Bending Moment at Rear Face of Block – lb.·ft. (N·m)1000 ( 1356 ) EXHAUST SYSTEM Maximum Allowable Back Pressure – in.Hg (kPa) 3.0 ( 10 ) Standard Exhaust Pipe Diameter – in. (mm) 5.0 ( 127 ) Maximum Coolant Temperature – °F (°C) 205 ( 96 ) Maximum Top Tank Temperature – °F (°C) 212 ( 100 ) Minimum Top Tank Temperature – °F (°C) 160 ( 71 ) Maximum Allowable Top Tank Temperature for Standby / Prime Power – °F (°C) 220 / 212 (104 / 100) Minimum Recommended Top Tank Temperature – °F (°C) 160 (71)

NTA855-G Series

Engine ModelPrime PowerStandby PowerFuel SystemAspiration
NT855-G205kW @1500 RPM225kW @1500 RPMCummins PT Pump, Direct InjectionTurbocharged
NT855-GA231kW @1500 RPM254kW @1500 RPMCummins PT Pump, Direct InjectionTurbocharged
NT855-G1

240kW @1500 RPM

287kW @1800 RPM

264kW @1500 RPM

317kW @1800 RPM

Cummins PT Pump, Direct InjectionTurbocharged & Aftercooled
NT855-G1A261kW @1500 RPM291kW @1500 RPMCummins PT Pump, Direct InjectionTurbocharged & Aftercooled
NT855-G1B284kW @1500 RPM321kW @1500 RPMCummins PT Pump, Direct InjectionTurbocharged & Aftercooled
NTA855-G2

284kW @1500 RPM

313kW @1800 RPM

321kW @1500 RPM

347kW @1800 RPM

Cummins PT Pump, Direct InjectionTurbocharged & Aftercooled
NTA855-G2A310kW @1500 RPM343kW @1500 RPMCummins PT Pump, Direct InjectionTurbocharged & Aftercooled
NTA855-G3358kW @1800 RPM399kW @1800 RPMCummins PT Pump, Direct InjectionTurbocharged & Aftercooled
NTA855-G4317kW @1500 RPM351kW @1500 RPMCummins PT Pump, Direct InjectionTurbocharged & Aftercooled
NTAA855-G7343kW @1500 RPM377kW @1500 RPMCummins PT Pump, Direct InjectionTurbocharged & Air-Air Cooled
NTAA855-G7AN.A406kW @1500 RPMCummins PT Pump, Direct InjectionTurbocharged & Air-Air Cooled

Any Question? Tell Us!

Contact Form