Cummins MTAA11-G2 50HZ

COOLING SYSTEM: Coolant Capacity, Engine Only –L 95 | Standard Thermostat (modulating) Range -°C 82–93 | Maximum Coolant Friction Head External to Engine –kPa 345 | Minimum Water Pump Inlet Pressure (Thermostat Full open and No Pressure Cap) –kPa 85 | Maximum Block Coolant Pressure with Closed Thermostat and no Pressure Cap –kPa 276 | Maximum Pressure Cap –kPa 70 | Maximum Engine Coolant temperature at Engine Outlet -°C––Standby 104 / ––Prime 100 | Minimum Engine Coolant temperature -°C 70 | Minimum Allowable Fill Rate -L/min 19 | Maximum Initial Fill Time –min 5

Minimum Coolant Expansion Space of System Capacity -% 5 | Maximum Allowable Deaeration Time –min 25 | Minimum Allowable Drawdown –L 71 | Maximum Coolant Flow to Accessory -L/min 75 | Minimum Coolant Capacity, Not Including Expansion Space –L 95 || LUBRICATION SYSTEM: Oil Pan Capacity (OP2060): ––High –L 34 / ––Low –L 26 | Total System Capacity with LF9009 Combine filter -L 39

Angularity of Standard Oil Pan: OP 2060-Degrees: -Degree ––Front Down 42 / ––Rear Down 45 / ––Fuel Pump Side Down 40 / ––Exhaust Side Down 45 | Normal Operate Oil Pressure Range –kPa 207-276 | Maximum Allowable Sump Oil Temperature -°C 121 | Minimum Engine Oil Pressure for Engine Protection Devices -kPa: —At Rated Speed and Load –kPa 193 / —At Low Idle –kPa 69 | Maximum Oil Consumption -g/kWh 024