Cummins 6CTA8.3-G1 163kw
Cummins 6CTA8.3-G1 163KW – Original from Dongfeng Cummins Engine Plant (DCEC), Cummins Joint Venture Plant, 50% shareholding by Cummins USA, original genuine Cummins generator engine.
Our large wholesale of Dongfeng Cummins generator engine brings competitive agent price for Cummins 6CTA8.3-G1 163kW. Our diesel generator factory manufacture Cummins generator set with high quality & fast delivery.
Cummins 6CTA8.3-G1 Agent Wholesale Price & Cummins parts wholesaler
15 Working Days
Cummins 6CTA8.3-G1 163kw
RATED POWER : 163 kW/219 HP @1500rpm
STANDBY POWER : 180 kW/241 HP @1500rpm
Dimension : 1500 * 900 * 1200 mm,
G.W : 800 KG
LEAD TIME : Around 10 Business Days
Rugged 4-cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.
Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.
The PowerCommand® electronic control is standard equipment and provides total genset system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentryTM protection, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.
Standard integral set-mounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.
Dual wall sub-base fuel tanks and in-skid day tanks are also offered.
The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems.
Further Information - Cummins 6CTA8.3-G1 163kw
|GENERAL INFORMATION – Cummins 6CTA8.3-G1 163kw|
|Engine Model||Cummins 6CTA8.3-G1 163kw|
|Engine Type||6 Cylinders, in Line|
|Bore * Stroke||114 * 135|
|Net Weight||708 Kg|
|Manufacture Plant||Dongfeng Cummins Plant|
Engine testing with fuel system, water pump and oil pump, without air compressor, alternator, fan, other options and driving accessory. Testing condition：air intake resistance 250 mmHg, exhaust back pressure 50 mmHg.
Engine installation Static bent torque permitted—rear surface of cylinder block Nm 1356 Static bent torque permitted—front surface of cylinder block Nm 495 Static bent torque permitted—flank surface of flywheel-house Nm 250 Lubrication system Normal oil pressure range Low idle kPa 207 Rated speed kPa 276_414 Max. oil temperature permitted in oil pan ℃ 121 Cooling system Coolant capacity
Engine only L 10 Max. coolant cycling resistance exterior engine kPa 28 Thermostat adjusting temperature (range) ℃ 82_95 Min. opening pressure of cap kPa 69 Max. coolant temperature permitted _ Standby Power/Base output Power ℃ 104/100