Cummins 6CT8.3-G2 133KW

Cummins 6CT8.3-G2 133KW – Original from Dongfeng Cummins Engine Plant (DCEC), Cummins Joint Venture Plant, 50% shareholding by Cummins USA, original genuine Cummins generator engine.

Our large wholesale of Dongfeng Cummins generator engine brings competitive agent price for Cummins 6CT8.3-G2 133kW. Our diesel generator factory manufacture Cummins generator set with high quality & fast delivery.

Cummins 6CT8.3-G2 Agent Wholesale Price & Cummins parts wholesaler

worldwide

Worldwide Shipping

security

Verified Certificates

queue

15 Working Days

Cummins 6CT8.3-G2 133KW

car-engine

RATED POWER : 133 kW/178 HP @1500rpm

STANDBY POWER : 145 kW/194 HP @1500rpm

package

PACKING DETAILS

Dimension : 1500 * 900 * 1200 mm,

G.W : 800 KG

express-delivery

LEAD TIME : Around 10 Business Days

Rugged 4-cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.

Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.

The PowerCommand® electronic control is standard equipment and provides total genset system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentryTM protection, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

Standard integral set-mounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.

Dual wall sub-base fuel tanks and in-skid day tanks are also offered.

The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems.

Further Information - Cummins 6CT8.3-G2 133KW

Engine testing with fuel system, water pump and oil pump, without air compressor, alternator, fan, other options and driving accessory. Testing condition:air intake resistance 250 mmHg, exhaust back pressure 50 mmHg.

Engine installation Static bent torque permitted—rear surface of cylinder block Nm 1356 Static bent torque permitted—front surface of cylinder block Nm 495 Static bent torque permitted—flank surface of flywheel-house Nm 250 Lubrication system Normal oil pressure range Low idle kPa 207 Rated speed kPa 276_414 Max. oil temperature permitted in oil pan ℃ 121 Cooling system Coolant capacity

Engine only L 10 Max. coolant cycling resistance exterior engine kPa 28 Thermostat adjusting temperature (range) ℃ 82_95 Min. opening pressure of cap kPa 69 Max. coolant temperature permitted _ Standby Power/Base output Power ℃ 104/100

6CTA8.3-G Series

Engine ModelRated PowerStandby PowerFuel SystemAspiration
6CT8.3-G2 (133kw)133kW @1500 RPM145kW @1500 RPMBYC PB Pump/GAC GovernorTurbocharged
6CTA8.3-G1 (163kw)163kW @1500 RPM180kW @1500 RPMBYC PB Pump/GAC GovernorTurbocharged/Aftercooled
6CTA8.3-G2 (163kw)163kW @1500 RPM180kW @1500 RPMBYC PB Pump/GAC GovernorTurbocharged/Aftercooled
6CTAA8.3-G2 (183kw)183kW @1500 RPM203kW @1500 RPMBeiyou P7100 Pump/GAC GovernorTurbocharged/Charge Air Cooled

Any Question? Tell Us!

Contact Form